Stainless Steel L-Angle Bracket Silicone Sol Precision Casting For Automation Equipment Fixing Brackets

Technical Advantages

 One-Piece L-Shape Without Welding

The right-angle form and corner gusset are cast as a single piece in the silicone sol mold. No welding means no heat-affected zone, no weld distortion, and no post-weld straightening — the bracket arrives at the 90° angle the mold was made to, and stays there.

 DFM Review for Small, Thin-Wall Castings

At 0.2 kg with 3.0 mm minimum wall, this bracket is at the small end of our casting range where fill behavior and cooling rate change quickly. Our review checks for thin-section freezing before fill completes, and adjusts gate and runner design so the corner and hole bosses fill cleanly without cold shuts.

  Angle and Hole Position Verified Together

For an L-bracket, checking hole position without checking the angle is incomplete. We measure both the 90° angle between mounting faces and the hole-to-hole position across the bend in the same inspection setup, so the bracket is confirmed to assemble correctly, not just to print.

Service Advantages

 Fast Turns on Small Casting Projects

 Small brackets like this move through tooling, casting, and machining faster than large housings. Your project manager schedules the L-angle bracket program in shorter cycles, which helps when a fixture or frame design needs a bracket sample quickly.

 First Article Covers Angle and Hole Data

Before batch production, we provide a first-article report including the 90° angle measurement, hole position data, surface roughness, and material certification — the data set that confirms an L-bracket will assemble correctly.

 Flexible Quantities for Design Iteration

New fixture and frame designs often go through several bracket revisions. We support pilot quantities and flexible MOQ so you can validate fit before committing to production volume. Batch traceability and 24-hour quality response stay in place through the bracket's production life.